Cable clamps

Version 1 x 1/2″- 3 x 1 5/8″

Version 1 x 1/2″- 3 x 1 5/8″

Version RG8

Version RG8

Designation Cable diameter (mm) Bracket dimensions Inlay dimensions Weight (kg)
A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)

Height Inlays

(mm)

C 1 x RG 8 10,5 16 20,0 19,5 16,7 10,4 5,10 50 0,032
C 1 x 1/2“-Hi 13,5 25 26,5 25,3 22,3 13,7 6,75 0,058
C 1 x 1/2“ 16,0 26,5 25,3 22,3 16,3 8,00 0,055
C 1 x 7/8“ 28,0 39,5 38,2 34,2 28,2 13,75 0,770
C 1 x 1 1/4“ 39,0 51,0 49,8 45,8 39,8 19,60 0,107
C 1 x 1 5/8“ 50,0 62,0 60,5 56,5 50,5 24,85 0,118
C 1 x 2 1/4“ 60,0 71,5 69,5 65,5 59,5 29,30 0,144
C 2 x RG 8 10,5 16 20,0 19,5 16,7 10,4 5,10 50 0,051
C 2 x 1/2“-Hi 13,5 25 26,5 25,3 22,3 13,7 6,75 0,098
C 2 x 1/2“ 16,0 26,5 25,3 22,3 16,3 8,00 0,091
C 2 x 7/8“ 28,0 39,5 38,2 34,2 28,2 13,75 0,157
C 2 x 1 1/4“ 39,0 51,0 49,8 45,8 39,8 19,60 0,220
C 2 x 1 5/8“ 50,0 62,0 60,5 56,5 50,5 24,85 0,247
C 2 x 2 1/4“ 60,0 71,5 69,5 65,5 59,5 29,30 0,308
C 3 x RG 8 10,5 16 20,0 19,5 16,7 10,4 5,10 50 0,071
C 3 x 1/2“-Hi 13,5 25 26,5 25,3 22,3 13,7 6,75 0,139
C 3 x 1/2“ 16,0 26,5 25,3 22,3 16,3 8,00 0,129
C 3 x 7/8“ 28,0 39,5 38,2 34,2 28,2 13,75 0,222
C 3 x 1 1/4“ 39,0 51,0 49,8 45,8 39,8 19,60 0,311
C 3 x 1 5/8“ 50,0 62,0 60,5 56,5 50,5 24,85 0,450

Subject to technical changes and errors excepted!

Around installation technology, cable clamps for the fastening of HF cables to telecommunication masts are our speciality. These cable clamps consist of a C frame including retaining feet (for installation on to a C-profile or flat bar) and a fastening screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied.

C frame
The C frames are stamped bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm.

Inlay

The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw. Naps at the contact surface to the cable ensure a secure hold. The respective sizes are inserted into the inlay radius in metric and imperial. The inlays are available in black and signal grey (RAL 7004).

Technical benefits of our cable clamps

  • Torque approximately 1.5 Nm
  • Uniform hexagon head, just one tool
  • Simple handing, as the upper inlay is connected
  • Trusted, secure hold even without counter nut
  • Chamfered inlays for fast, simple application
  • Wide overhang of the inlays to prevent falling
  • Size information in the inlay for better recognition.

 

 

Structure

Cable clamps consist of a C frame including retaining feet for the installation on to a C profile or flat bar and a retaining screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied.

Materials

C-frame, fastening screw and thrust washer are made of stainless steel with the material number 1.4301 or 1.4567. Cable troughs are made of UV and weather-resistant polyamide (PA).

Special preparations and use cases can be produced on request.

Schulz cable clamps are used externally for fastening HF cables in telecommunications.

 

 

Kabelschellen Maßtabelle (698 downloads)

In order to display and read the 3D PDF, you will need Acrobat Reader with an activated 3D function! Subject to technical changes and errors excepted!